Rotary Encoder Setup - here you can configure the appropriate rotary encoder. Each rotary has 2 mechanical features. You can scroll and in addition you can also press the encoder wheel like a button.

• In the first row you see the rotary encoder and the position as a graphic bar.

• Steps(Value), default value is 50 steps which equals 4%. Another words you have to scroll 50 "steps" for the complete range of 200% (from minus 100% to plus 100%).

• Preset Value, default is zero percentage. Here you can define the value where the value should "jump" to if you press the rotary encoder.

• FM Dependent(FM = Flight Mode), here you could choose if the rotary encoder should have different percentages for each flight mode.

  NOTE: If you adjusted the rotary as flight mode dependent, you will see that the value at the home screen is underlined. Also in general all underlined values are flight mode dependent.

• Beep, select if you want to have a acoustic feedback if you use the rotary encoder.

• Vibration, select yes if you want to get a short vibration if you press the rotary encoder or whenever you reach the preset value.